Telstra Business Smart Modem V7610, Руководство пользователя

Страница: 4 / 8

4 |
Telstra Business Smart Modem User Guide
Setting up your new
Telstra Business Smart Modem.
The diagram on Page 7 will help guide you through these instructions.
2. Plug-in your Telstra Mobile
Broadband Backup.
Unpack your Telstra 4GX USB Pro and
insert it into the available USB port
on the left side of the Modem.
Tip: For the best Mobile coverage,
place the mobile broadband device
(USB) in an open, elevated area
allowing for optimal signal strength.
1. Connect your Modem.
a. If applicable, unplug the cable from the
DSL port on the old modem, and
connect it into the
GREY DSL port on
your Telstra Business Smart Modem.
b. Insert the
POWER
cable into the
Business Smart Modem and plug the
power supply into the wall. Make sure
the power point is switched on.
Press
the power button located on the
back of the modem.
c. Your Telstra Business Smart Modem™
will now turn on. Please wait for the
WAN light on the front of the Modem
to
turn solid blue .
This can take up to 10 minutes.