7. lAunchinG sdM
2.
enter the
Device Ip address
of the router.
telstra default shown above 10.10.10.1.
3.
select
This device has HTTpS enabled and I want to use it
.
4.
click
Launch
.
A security Alert will appear as per below:
STEpS:
1. Go to start – All Programs – cisco systems – cisco sdM
– cisco sdM. you will then be prompted with the below
text box.
9. A pop up screen will now show with
Warning – Security
as above. click
Yes
.
5.
click
Yes
.
6. enter
User name
and
password
. A default administrator
user name and password “advantage/advantage” has
been pre-configured into the router configuration.
for your network and router security, you are advised to
change your user name and password. see section 8 (f)
–
adding User name and password
.
you will be prompted to enter the user name and password.
7. An error may occur such as the one shown above.
to unblock the sdM popup page, move your mouse
cursor over the yellow bar and right click the mouse
and select
allow Blocked Content
.
the popup screen will then Appear: “Warning – httPs”
8. this is a self signed certificate by the router, so the
publisher will be unknown. this is the correct behaviour,
click
Yes
.
09
10
11. Windows security Alert may pop up.
click
Unblock
.
10. A warning will then appear, click
Yes
.