Telstar TAI012110MD, Инструкция по эксплуатации

Страница: 25 / 32

HOW THE AIR CONDITIONER WORKS?
1 hour
1 hour
Set
Temperature
Set
Temperature
SLEEP operation
1 hour 1 hour
SLEEP operation
7 hours timer off
7 hours timer off
Heating
Cooling
AUTO operation
When you set the air conditioner in AUTO mode, it
will automatically select cooling, heating
(cooling/heating models only), or fan only operation
depending on set temperature and the room
temperature.
The air conditioner will control room temperature
automatically to the temperature point you set.
If you feel uncomfortable in the AUTO mode, you
can set your desired temperature.
SLEEP operation
When you push SLEEP button on remote controller
during cooling, heating (cooling & heating models
only), or AUTO operation the air conditioner will
automatically increase (cooling) or decrease
(heating)per hour for the first 2 hours, then hold
steadily for the next 5 hours, after that it will switch
off. This mode saves you energy and brings you
comfortat night.
DRYING operation
The fan speed will be automatically controlled under dry operation.
During the dry operation, if the room temperature is lower than 10OC(50OF), the
compressor stops operation and restarts until the room temperature is above
12OC (54OF).
Optimal operation
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not torwards people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to
excessive temperature levels.
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
Use TIMER ON button on the remote controller to select a time you want to start your air
conditioner.
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner
may be reduced and the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or heating performance may be
reduced.
Do not operate unit with horizontal louvre in closed position.
A/C
TAI012110MD