Telrad Connegy Avanti 3025 set, Руководство пользователя

Страница: 13 / 62

Avanti 3025 set 7
[REDIAL/PAUSE] and
[SPEED DIAL/PROGRAM] .
[LOW HIGH]
This button adjusts the volume of the speaker, handset,
headset, ringer and background music when any of these is
active. You can see the volume level on the bottom line of
the display.
Pressing this button when the telephone is idle changes the
display contrast.
[FLASH]
Depending on system programming, this button is used to
disconnect or to send Flash Signal to the connected remote
exchange.
PROGRAMMABLE BUTTONS
The following buttons on your set have already been pro-
grammed to perform specific functions. The System Admin-
istrator can program these buttons to perform other
functions. If the function of certain buttons does not match
those appearing in the figure at the beginning of this guide,
consult your System Administrator.
NOTE With the default configuration, the following
features are programmed on the four buttons
above the dialpad:
[MSG] , [DND] , [MUTE] and
[SPKR] .
[MSG]
This button is used to send messages to
other extensions and to reply to mes-
sages left at your extension.
Avanti3025_txt.fm Page 7 Sunday, May 11, 2003 5:28 PM