Single line telephone
1
ABOUT THIS GUIDE
This Guide will help you use your telephone to access some of
the many features of your Telrad Connegy telephone system.
You may access most of the system features by dialing access
codes. If your telephone is pulse dialing, you are not able to use
features which require the
[
*
]
and
[#]
buttons.
The Feature codes table, at the end of this guide, lists the
default access codes. If any of the codes have been changed,
your System Administrator can assist you in updating the Fea-
ture codes table.
NOTE
Before performing any operation, described in this
guide, you must first lift the handset.
TO PERFORM A HOOKFLASH
• Press momentarily on the hookswitch, or press the hook-
flash or signaling button (if your telephone has one).
Slt_txt.fm Page 1 Monday, May 12, 2003 4:52 PM
