Telpar SP-328 Data Logger Thermal Printer
Rev A 8-26-2010
Page 7 of 19
2.4
Paper Loading
To allow access to the printer paper supply, push the spring loaded rectangular latches
inward (together) and pull forward to release the printer access panel. Install a new roll
of Telpar approved paper (thermal side UP) on the paper spindle. Fold paper back on
itself to form a straight and clean edge, and feed the leading edge of the paper directly
into the paper input slot. The paper will automatically feed paper through the
mechanism several inches. Use the feed button to advance paper through the bottom
take-up slot in the bezel - feed an appropriate amount of paper through the printer to
allow the installation of the paper onto the Paper Take Up Journal. To load paper onto
the take up, unscrew the fastener holding the left side guide plate and pinch rod. Install
paper between the main take up shaft and pinch bar and screw the fastener back onto
the take up spindle. Manually rotate the take up mechanism as shown to remove
excess slack in the paper.
