Telpar SP-328 Data Logger Thermal Printer
Rev A 8-26-2010
Page 11 of 19
4.3 Parallel Interface Cable (Optional)
This parallel cable configuration is used to interface the SP-328 with all IBM and IBM compatible
systems. A parallel adapter cable is required for use of the parallel interface. This can be
purchased at Telpar. This cable allows
connection to the printer interface
with a 1:1
cable,
connection, which is terminated
by
a DB25P on each end. This 25 pin cable
configuration is available at most computer supply
stores.
ex. pin 1
to
pin 1, pin 2
to
pin 2,
...pin 25 to pin 25.
Please Note:
Cable length for the standard mode of parallel
printing
(through MS-DOS) should be limited to 25 feet or less.
If using a Windows
operating system:
1) Disable the quick print to port feature.
This is located under the print manager.
2) Cable length should not exceed 6 feet.
