QUICK START GUIDE |
5
Select the Analog XLR connectors for audio input.
Answer “Yes” to allow control of your unit from either port.
Let’s answer “No” to the SIP server question.
Keep this easy; answer “Yes” here.
Answer “Yes” here. We’ll use this port.
Using the keypad, enter a name for this Z/IP ONE.
Then click to Apply settings and exit
Click OK to complete the Setup Wizard.
Plug your Internet-connected network to the WAN port.
Then, highlight and select Status.
The top Status screen should show WAN connected.
Within a few seconds, the ZIP light should come on, too.
The ZIP indicator is your assurance that your Z/IP ONE is communicating with the Telos ZIP Server, and that
connections to other Z/IP ONEs and Zephyr/IPs are just two button presses away.
What if the ZIP indicator doesn’t light up? This condition is usually caused by a very restrictive network firewall,
a non-standard DNS configuration, or not having DHCP available to obtain an IP address automatically. Appendix
A offers information and suggestions about working through restrictive network firewalls and alternatively
configuring DNS.
