QUICK-START INSTALLATION GUIDE
Click in the “Address” edit box to enter an AES67 multicast address for each AE67 pair.
See Figure 8
.
Figure 8 - AES67 Multicast Addresses
Selecting “Delays” under I/O allows you to set the video delay equal to the SDI AoIP Node’s audio latency.
In intances where the SDI output needs to be delayed by an even frame, the video delay can be set to 1
full frame and the audio delay then increased to make unit’s latency plus any additional delay equal to one
full frame. In the example below, the video delay is set to match the SDI AoIP Node’s latency.
Figure 9 - Delay Settings
Conclusion
This completes the Quick Start Guide. Please see the “Quick Links” pages below for additional
support information.
