QUICK-START INSTALLATION GUIDE
Telos Alliance
®
SDI AoIP Node
Bridging the Present and Future of TV Technology
Introduction
Congratulations on your purchase of SDI AoIP Node. We know that you’re anxious to get started, so this
quick start guide (QSG) will take you from ‘out of the box’ to ‘up and running’ as quickly as possible by
illustrating the steps required to prepare the SDI AoIP Node to de-embed and convert up to 8 pairs of
audio from two SDI inputs to AES67.
Plug each of the SDI AoIP Node’s two power supplies into two different AC power circuits.
Plug an Ethernet cable from your network into the Control Ethernet port.
See Figure 1
.
Figure 1 - SDI AoIP Node Rear Panel
