7. PRODUCT INSTALLATION AND CHECK THE WORKING
STATE
7.1 The device part and the magnet part needs to be installed
within 10MM when the door/window is closed.
NOTE
:
1. This Sensor should not be mounted directly on or near
metal framing or other large metallic objects since metal
objects may weaken the radio signal strength.
2. This Sensor should only be placed indoor and away from
water and other extreme weather conditions.
7.2 Using one of the following methods to mount the device to
the wall, door or window:
• 3M Tap Mode
1) Stick the included self-adhesive pads to the bottom of the
device and magnet.
2) Peel off the protective layer of the sticker.
3) Stick the device onto the door/window frame.
4) Stick the magnet onto the moving part of the door/window,
no further than 10mm from the sensor
