Tellur TLL331091, Руководство пользователя

Страница: 10 / 19

NOTE :
1. Wipe clean the surface where the Door Window Sensor will
be mounted.
2. Any dust and particles can reduce the adhesion of
double-sided mounting tape.
• Screw Mode
1) Take the battery cover apart from the device part by
pressing and holding the latch button and the holder of the
magnet part;
2) Screw the battery cover on to the door or window frame;
3) Keep the orientation marks of the device part and the
magnet are oriented towards each other;
4) Screw the magnet holder to the moving part of the door or
window;
5) Mount the device part on to battery cover;
6) Mount the magnet part to the holder.
7.3 Change the battery and change the Wi-Fi network
In the case of the battery is over or the Wi-Fi network is
changed (SSID or password is changed), take down the device
part, to replace the battery or config the Wi-Fi network again;
1) Press and hold the Latch button to take apart the device
part. Leave battery cover tapped on screw on the frame;
2) Change the batteries;
3) Or follow the Device add procedures;