tellsystem.eu
EasyCon GSM
page 8.
TellSystem Communication
Programming installation settings:
ssssssss = the eight “s” letters determine whether you wish to send sMs to the phone numbers to be notified. If “s”=1 the device
sends sMs; if 0 it does not. If you leave it blank, previous settings remain.
vvvvvvvv = the eight “v” letters determine whether you wish to send VoICe message to the phone numbers to be notified. If “s”=1
the device makes a voice call; if 0 it does not. If you leave it blank, previous settings remain.
tttt = types of the two inputs. “t” can be a value between 0 and 5, a letter “i” (= inverted) or “n” (= non-inverted) needs to be put
before the value. e.g.: i1 = normal inverted input
0
Input off
1
24 hour normal input
2
not used
If you put an “i” before the number, the input will be inverted.
kk = type of output. “k” = a value between 1 and 7.
(K)
Mono/BI stable
Alarm control
Caller ID control
1
BI stable
oFF
oFF
2
Mono
on
oFF
3
BI
on
oFF
4
Mono
oFF
on
5
BI
oFF
on
6
Mono
on
on
7
BI
on
on
e.g.: Input1 sends sMs to 2nd and 3rd phone number, Input2 sends voice message to 1st phone number, input1 is 24 hour normal,
input2 is inverted normal. the output is monostable, controlled with alarm.
1234o0110000000000000,0000000010000000,,,,n1i1n0n0,22
