manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, Справочник команд AT

Поделиться
Скачать
Telit Wireless Solutions WE866E4-P Скачать руководство пользователя страница 10

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

10

2018-02-16

PRELIMINAR

Y

 1  Introduction

•

Scope, page 10

•

Audience, page 10

•

Contact Information, Support, page 10

•

Text Convention, page 11

•

Related Documents, page 11

1.1  Scope

This document is aimed in providing an detailed specification and a comprehensive listing 
as a reference for the whole set of AT command.

1.2  Audience

This document is intended for Telit customers, who are integrators, about to implement 
their applications using our WE866E4-P modules.

Readers of this document should be familiar with Telit modules and their ease of 
controlling by means of AT Commands.

1.3  Contact Information, Support

For general contact, technical support services, technical questions and report 
documentation errors contact Telit Technical Support at:

•

[email protected]

Alternatively, use:

http://www.telit.com/support

For detailed information about where you can buy the Telit modules or for 
recommendations on accessories and components visit:

http://www.telit.com

Our aim is to make this guide as helpful as possible. Keep us informed of your comments 
and suggestions for improvements.

Telit appreciates feedback from the users of our information.

Содержание WE866E4-P

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды