WE310F5-I/P Porting Reference Guide
1VV0301733 Rev. 6
Page 22 of 40
2021-10-07
Features
GS2K
WE310F5
STEP3:
Send 2nd block as maximum as 1536. (
Includes 12bytes of Header and 1524
bytes of Data).
Ex: For1400 bytes of data
1st block is inlclude 12+54 bytes,
2nd block 1408 = 12+1346(1400-54)+ 50
( Dummy data)
No need to wait of any ACK for Telit,
goto STEP1
Data Exchange from Telit to
Host
STEP1:
Check for GPIO37 to become HIGH
Sends of READ_REQUEST to GS
node ( GS2K will Pull the GPIO32
low)
STEP2:
Wait for GPIO37 to be HIGH
Read READ_RESPONSE_OK /
READ_RESPONSE_NOK
If READ_RESPONSE_NOK goto
STEP1
If READ_RESPONSE_OK goto STEP3
STEP3:
parse the data length in the header
and Read the data.
STEP1:
Wait for GPIO37 to be HIGH
Sends of READ_REQUEST to Telit
Module
STEP2:
Response will be of BlockSize
(64Bytes), This response contains
12byte of header and 54Bytes Data (If
any)
If READ_RESPONSE_OK, goto STEP3
If READ_RESPONSE_NOK goto STEP1
STEP3:
Parse the length and wait for Data for
a maximum of 2msec.
WLAN
Phy Modes
802.11 b/g/n
802.11 b/g/n
Wi-Fi Band
Single Band(2.4GHz)
Single Band(2.4GHz)
Wi-Fi/BLE
Wi-Fi
Combo Module (Wi-Fi + BLE 5)
No of Layer 2 Station supported 16
10
Wi-Fi Direct ( P2P)
Yes
No
Networking
Network protocols
IPv4
ARP
ICMP
UDP
TCP
DHCP Client
DNS Client
DHCP Server
DNS Server
HTTP(S) Client
HTTP(S) Server
TLS 1.0/1.2 client
TLS 1.0 Server
mDNS/DNS-SD
SNTP Client
IPv4 - supported
ARP - supported
ICMP - supported
UDP -supported
TCP - supported
DHCP Client - supported
DNS Client - supported
DHCP Server - supported
DNS Server - supported
HTTP(S) Client - supported
HTTP(S) Server - supported
TLS 1.1/1.2 client - supported
TLS 1.1/1.2 Server - supported
mDNS/DNS-SD -supported
SNTP Client
–
supported