Telit Wireless Solutions WE310F5-X, Справочное руководство

Страница: 29 / 79

WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3 Page 29 of 79 2021-10-25
Not Subject to NDA
Command Syntax
AT&Yn
Parameter Description
Table 24: Select Default Profile Parameters.
Parameter Optional/Mandatory Value Description
n
Mandatory 0 For profile 0
1 For profile 1
Sets default the profile specified by n (0 or 1).
Synchronous Response
Table 25: Select Default Profile Synchronous Response.
Responses Remarks
OK Success
ERROR:INVALID INPUT If parameters are not valid. (Other than 0 and 1)
Example
AT&Y0
OK
6.4.5. Define Profile
Command Description
The configuration parameter values that define the behavior of the Telit node are
grouped into Profiles. These profiles are stored in non-volatile memory when not in use.
The default configuration supports single Profile. The contents of a profile are as listed.
Table 26: Define Profile Parameters.
Parameter Values Reference
General Wireless Parameter
802.11 Operating Mode STA, Limited AP Operation Mode, 38
Transmit Power Configuration N/A
802.11 Transmit Retry Count N/A
Power Save Mode Enabled, Disabled
Custom Power Save Radio Receive, 60
802.11 Radio Mode Enabled, Disabled
Active Radio Receive, 56
Auto Connect Mode, Wireless Interface Settings
802.11 Operating Mode STA
Operation Mode 42
Operating Channel 4,10,11,12,13,14,26,27
SSID Parameter Any valid SSID
Auto Connect Mode, Network Interface Settings
Mode Server, Client