SL869-V3 EVK User Guide
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 12 of 26
Mod. 0810 2011-07 Rev.2
3.2.
SL869-V3 Evaluation Board components
DL101 DL102
PL104
PL107
PL102
PL101
TX
LED 1PPS LED Vcc Supply
Vbatt Supply
UART-USB1 USB2
On/Off 1PPS SMA
SL869 BOOT Vant Supply
Antenna SMA
SW201 SO102
PL108
PL113
SO101
PL105 PL106 Antenna Sense 2 & 1
Note: PL105 and PL106 must be jumpered 1-2 to operate the on-board Teseo 3
Antenna Sense circuit.
Figure 3-2 SL869-V3 Evaluation Board components
Required External Connections
Connect the PC to UART-USB (PL102)
Connect the GNSS antenna to RF-IN (SO101)