Written (
*
*
)
To read messages written and stored previously.
Parameters (
*
*
)
Before sending your first SMS message, all the data required to activate this feature must
be entered, or at least the SMS Service Centre Number provided by the Network opera-
tor or service provider. If these are not changed, these parameters remain valid for suc-
cessive SMS messages received.
NOTE: Different parameters for the transmission of SMS messages can be set from the
User
defined
position (scrolling by pressing
'
[
...
]).
The number of parameters that can be stored depends on the SIM card.
The
Telephone Parameters
(
*
*
) option stores the parameters in the
telephone’s memory and not on the SIM card.
Name (
*
*
[
User
defined 1...5
]
)
This allows a name to be allocated to the parameter, such as the network operator or
service provider’s name. This is useful in that it allows a set profile comprising data en-
tered in the next five sub-menus (
Service
Centre
Number
,
Validity
,
Destination
,
Protocol
,
Default
) to be associated to each parameter, when working with a number
of parameters.
Once the name has been entered, confirm by pressing
,
.
Service Centre Number (
*
*
[
User
defined 1...5
]
)
Enter the SMS Service Centre Number provided by the network operator or service pro-
vider. The SMS Service Centre Number can also be viewed by pressing
*
when a mes-
sage has been received or written.
NOTE: Do not confuse this number with the destination telephone number.
Validity (
*
*
[
User
defined 1...5
]
)
This service allows the length of time (
minutes
,
hours
,
days
,
weeks
) the SMS mes-
sage is to be stored by the SMS Service Centre. To move between the sections press
'
and use
.
and
/
to change the unit of time.
SAT600 User's Guide 1110...
pagina 49
Mercoledì 11 Ottobre 2000 17.07