ME50
ME50
ME50
ME50----868 Demo Case
868 Demo Case
868 Demo Case
868 Demo Case User Guide
User Guide
User Guide
User Guide
1vv0300907 Rev.5 – 2012-10-15
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 18 of 23
Mod. 0806 2011-07 Rev.2
7.
In the bottom panel the “OK” response from ME50-868 is shown. Now the module in
the first DemoBoard is configured to work as meter in T2 mode and is ready to send
or receive data. Keep this window open because it will be used afterwards to send an
example frame.
8.
To configure the second module as “other” device, open a new instance of SR
Manager Tool and follow the same steps shown above to open the configuration
window, this time selecting the serial port connected to the second DemoBoard.
