![Telit Wireless Solutions M.2 HN930 Скачать руководство пользователя страница 40](http://html1.mh-extra.com/html/telit-wireless-solutions/m-2-hn930/m-2-hn930_hardware-users-manual_1083700040.webp)
xN930 M.2 Hardware User Guide
COEX2
IDC_LteFrameSync
- Synchronous signal
indicating LTE frame start.
Indicates LTE frame start to BT/WLAN
device. Can be used by BT to synch up
periodic activity with LTE timing
64
I/O
1.8 V
3.7
Power Supply Interface
The M.2 modules require the host to provide the 3.3 V power source. The voltage source is
expected to be available during the system’s stand-by/suspend state to support wake event
processing on the communications card.
The 3.3 V power and ground pins are listed in Table 18.
Section 8, Power Delivery Requirements, provides electrical requirements for the
power supply and I/O signals.
Table 18 Power & Ground Signals
Power Pins
Description
2, 4, 70, 72, 74
3.3 V Supply
3, 5, 11, 27, 33, 39, 45, 51, 57, 71, 73
Ground
3.8
Trace & Debug Interface
The USB port on the M.2 module will be used to support system tracing of the Protocol
stack. The USB port is also used for software download and manufacturing testing.
The JTAG & MIPI PTI1 ports are accessible on the module to support system debug. A
temporary cable assembly over flat flex should be assembled on bottom of the module and
lead out of the final product. The cable would not be mounted on the final
product.
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 40 of 77