GT863-3GG Product Description
80269ST10077a Rev.0
–
2010-09-22
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved.
Page 37 of 37
10.
SAFETY RECOMMANDATIONS
READ CAREFULLY
Be sure the use of this product is allowed in the country and in the environment
required. The use of this product may be dangerous and has to be avoided in the
following areas:
•
Where it can interfere with other electronic devices in environments such as
hospitals, airports, aircrafts, etc.
•
Where there is risk of explosion such as gasoline stations, oil refineries, etc.
It is responsibility of the user to enforce the country regulation and the
specific environment regulation.
Do not disassemble the product; any mark of tampering will compromise the
warranty validity. We recommend following the instructions of the hardware user
guides for a correct wiring of the product. The product has to be supplied with a
stabilized voltage source and the wiring has to be conforming to the security and fire
prevention regulations. The product has to be handled with care, avoiding any contact
with the pins because electrostatic discharges may damage the product itself. Same
cautions have to be taken for the SIM, checking carefully the instruction for its use.
Do not insert or remove the SIM when the product is in power saving mode.
The system integrator is responsible of the functioning of the final product; therefore,
care has to be taken to the external components of the module, as well as of any
project or installation issue, because the risk of disturbing the GSM network or
external devices or having impact on the security. Should there be any doubt, please
refer to the technical documentation and the regulations in force. Every module has
to be equipped with a proper antenna with specific characteristics. The antenna has
to be installed with care in order to avoid any interference with other electronic
devices and has to guarantee a minimum distance from the body (20 cm). In case of
this requirement cannot be satisfied, the system integrator has to assess the final
product against the SAR regulation.
The European Community provides some Directives for the electronic equipments
introduced on the market. All the relevant information’s are available on the
European Community website:
The text of the Directive 99/05 regarding telecommunication equipments is available,
while the applicable Directives (Low Voltage and EMC) are available at:
