manualshive.com logo in svg

Telit Wireless Solutions GM862GPS Series, Техническое руководство

Поделиться
Скачать
Telit Wireless Solutions GM862GPS Series Скачать руководство пользователя страница 32

TECHNICAL MANUAL 

Telit GM862-GPS 

Quad Band GPS Data Terminal Module 

 

Pag.32 of 79 

Rev. 0 

 

GM862-GPS 

 

GSM-GPRS 

Protocol 

Stack 

FLASH ROM 

memory

 

Available 

User NVM 

FLASH  

Memory 

(3Mbyte) 

FLASH ROM 

PYTHON 1.5.2+ 

INTERPRETER

ENGINE

 

RAM  

for 

GSM-GPRS

modem 

Protocol 

Stack

 

Available 

RAM for  

Python 

Interpreter 

(1.5 Mbyte) 

 

RAM 

GPRS MODEM 

ENGINE 

VIRTUAL  INTERNAL

AT SERIAL PORT 

AT COMMANDS

HARDWARE RESOURCES 

MDM module 

 

3.12.2 Python 1.5.2+ Copyright Notice 

The Python code implemented into the GM862-GPS is copyrighted by Stichting 
Mathematisch Centrum, this is the license: 
 
Copyright © 1991-1995 by Stichting Mathematisch Centrum, Amsterdam, The 
Netherlands.  
All Rights Reserved  
Permission to use, copy, modify, and distribute this software and its documentation for any 
purpose and without fee is hereby granted, provided that the above copyright notice 
appear in all copies and that both that copyright notice and this permission notice appear 
in supporting documentation, and that the names of Stichting Mathematisch Centrum or 
CWI or Corporation for National Research Initiatives or CNRI not be used in advertising or 
publicity pertaining to distribution of the software without specific, written prior permission.  
While CWI is the initial source for this software, a modified version is made available by 
the Corporation for National Research Initiatives (CNRI) at the Internet address 

ftp://ftp.python.org

.  

STICHTING MATHEMATISCH CENTRUM AND CNRI DISCLAIM ALL WARRANTIES 
WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL STICHTING 
MATHEMATISCH CENTRUM OR CNRI BE LIABLE FOR ANY SPECIAL, INDIRECT OR 

Содержание GM862GPS Series


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды