![background image](http://html1.mh-extra.com/html/telit-wireless-solutions/gc864-quad-v2/gc864-quad-v2_hardware-users-manual_1083640077.webp)
GE/GC864-QUAD V2 and GE864-GPS Hardware User Guide
1vv0300915 Rev.5 – 2011-10-03
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved.
Page 77 of 94
13.1.2.
Enabling DAC
The AT command below is available to use the DAC function:
AT#DAC[=<enable>[,<value>]]
<value>
– scale factor of the integrated output voltage (0–1023, with 10 bit precision), and it
must be present if
<enable>=1
.
Refer to SW User Guide or AT Commands Reference Guide for the full description of this
function.
Refer to SW User Guide or AT Commands Reference Guide for the full description of this
function.
NOTE:
The DAC frequency is selected internally. D/A converter must not be used during
POWERSAVING.
13.1.3.
Low Pass Filter Example