Telit Wireless Solutions GainSpan GS2011M, Руководство пользователя по оборудованию

Страница: 8 / 69

GS2011M Low Power Wi-Fi Module Hardware User Guide
1VV0301482 Rev. 5.0 Page 8
of
69 2018-01-10
Revision History
This version of the GainSpan GS2011M Low Power Wi-Fi Data Sheet contains the
following new information listed in Table 1, page 8 .
Audience
This manual is designed to help system designers build low power, cost effective, flexible
platforms to add Wi-Fi connectivity for embedded device applications using the GainSpan
GS2011M based module.
Standards
The standards that are supported by the GainSpan modules are IEEE 802.11 b/g/n.
Certifications
GainSpan GS2011M Low Power Wi-Fi Module has Certification Compliance for the
following:
Table 1 Revision History
Version Date Remarks
1.0 June 2015
Removed reference to external PA, LNA, and control of external RF Switch
(GS2011MIE only). See
2.2.1.2 802.11 PHY, page 26 .
Added Errata notification to the Pin Signal and Pin MUX tables regarding
SPI0_OUT and SPI1_OUT signals. See Table 7, page 42 and Table 8,
page 47 .
Updated Power Consumption information in Table 15, page 55 .
Updated 802.11 Radio Parameters Transmit/Receive Specifications for
1Mbps and 54Mbps in
Table 16, page 56 .
2.0 February 2016
Updated 802.11 Radio Parameters Output power (average) and Receive
Sensitivity at antenna port in
Table 16, page 56 .
Updated the Note under 5.1 GS2011Mxx Recommended PCB Footprint and
Dimensions
3.0 July 2016 Updated 802.11 Radio Parameters RF Frequency Range in Table 16, page 56
4.0 November 2017
Corrected the System State - WLAN Continuous Transmit from 16dbm to
15dbm see
Table 15, page 55
5.0 January 2018
Updated Output power (average) for GS2011MIE and GS2011MIZ in Table
16, page 56