A. MOUNTING THE MICROPHONE
If you choose to mount your microphone (
OMNI or CARDIOID
) with the
microphone capsule
facing
the dish (above photo) you have great wind
protection from the beginning - since the large black windshield foam
surrounding the Universal MK2 Zeppelin mic holder.
1.
After
ASSEMBLING
(FROM THE PHOTOS/PICTURES ABOVE & BELOW) -
please proceed and
ADJUST THE CABLE LENGTH
- simply by
pulling the cable (to extend it) in any direction, forward or backwards.
IMPORTANT!
This is to make sure you have enough length from the handle to
your recorder and microphone without too much bending (and risking causing
damage) to the cable. You don´t have to use adapters if you aren´t using the
Universal MK2 it in a stationary/permanent installation, far away from your
recorder.
2.
Place the cable from the top of the handle (short end) - and pull it thru the
Zeppelin Microphone holder - until you have enough cable length to
connect the cables
XLR female connector
to the microphones
XLR male
connector.
If you mount a microphone (omni or cardioid) facing the dish - let
the cable rest under/beneath the microphone. As long as the microphone is
firmly placed in the Telinga Universal Zeppelin Holder the cable will not cause
additional handling noise.
ADJUST THE WIRE LENGTH
pulling the wire (to extend it) in any direction, forward or backwards.
This is to make sure you have enough length from the handle to
IMPORTANT!
damage). You don ́t have to use adapters if you aren ́t using the
your recorder and microphone without too much bending (and risking causing
Zeppelin Microphone holder - until you have enough length to
Adjust the wire from the top of the handle (short end) - and pull it thru the
to the microphones
XLR male
the wire rest under/beneath the microphone. As long as the microphone is
firmly placed in the Telinga Universal Zeppelin Holder the wire should not cause
additional handling noise.
connect the
connector.
XLR female connector
If you mount a microphone (omni or cardioid) facing the dish - let
A. MOUNTING THE MICROPHONE INSIDE THE DISH
- simply by
Universal MK2 it in a stationary installation, far away from your recorder.