TELIKOU
WS-200 Two-Channel Recessed Speaker Station
3
2. Panel Mic Connector
WS-200A uses a double-purpose connector which supports XLR plug or 1/4inch plug unbalanced
microphone.
The wiring of 3-pin XLR microphone is as follows:
Pin 1 -- Mic common
Pin 2 -- Mic hot
Pin 3 -- Null
WS-200B uses an internal microphone.
3. Microphone LED
This LED lights when Mic switch turns to ON or PTT.
4. Microphone Switch Button (Mic)
Press microphone button will turn on the microphone and the green LED light at right. The audio
signal from microphone will be sent thought intercom line. Press microphone button again, the
microphone and LED light will be turned off. When WS-200 is connected to any stranded TELIKOU
main station, this microphone switch button can be turned off by RMK function on main station.
When the front panel speaker is turned on, pressing microphone button will reduce the speaker
output level about 6dB to help minimize the feedback.
After talking, the microphone should be turned off.
5. Speaker Switch
The Speaker Switch turns the front panel speaker on or off.
When the front panel speaker is turned on, pressing Mic button will reduce the speaker output level
about 6dB and helps minimize feedback.
6. Listen Level Control
Turn this control to set the listen level of received audio signal within communication system. It
adjusts listen level of headset and speaker. Turn the control completely counterclockwise to silence
the channel.
7. Channel Select Switch
This switch selects which channel WS-200 is using.
8. Call Switch
Send call signal from station to channel. Turn up or down the handle of call switch, the LED which
