TELIKOU
MS-800T Eight Channel Main Station
3
Pin 1 -- Mic common
Pin 2 -- Mic hot
Pin 3 -- Null
8. Headset connector
4-pin XLR Male or 5-pin XLR Female
EARPHONE: Dynamic 50-2000 ohm
MICROPHONE: Dynamic 100-600 ohm
The wiring of headset is as follow:
Pin 1
—Mic. common
Pin 2
—Mic. hot
Pin 3--headphone common
Pin 4--headphone hot
Pin 5
—Null
9. Panel Mic Gain
It is used to adjust panel microphone gain to achieve proper microphone output level. It does not
affect
headset microphone’s sensitivity.
The gain has pre-set as electrets microphone as default. If panel microphone is changed, please
re-adjust panel Mic. gain.
10. Remote Mic Kill Switch (RMK)
Microphone on belt pack may forget to be turned off by operators. Noise will disturb the whole
intercom system.
The Remote Microphone Kill (RMK) switch will turn off the microphone of every beltpack remotely. If
the Talk Functions of a large number of beltpacks have inadvertently been left activated, incidental
noise and talking can make it difficult or impossible to communicate on the intercom system. The
Remote Microphone Kill switch can be pressed to quiet the line in this situation.
Notice:
if any beltpack microphone within intercom line can be turned off in remote way, each
powered working station within this intercom system must be interconnected via ―ONLINE‖ interface
on its rear panel.
11. Listen Level Control
This control is to set the listening level of audio signal in headset or panel speaker. Turn the control
on counterclockwise completely will silence the channel.
