TELIKOU
MS-500（4+1Channel）Main Station
10
Pin 3 --- Audio Signal
Pin 4 --- Tally light drive signal output
Pin 5 --- Tally light drive signal output
B. A pair of XLR-3 connectors is put on each end of two-core shield
cable, one end is XLR-3M and
another end is XLR-3F. If longer cable is required, any two cables can be connected by XLR-3M
and XLR-3F ends.
The connector wiring is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- Power or Control Signal
Pin 3 --- Audio Signal
Notice:
The pin 1 (Common) cannot be connected to XLR shell.
V
、
Technical Specification
PRE-AMP:
Microphone impedance: Dynamic 200ohm
Gain form Mic to intercom line: +49dB
Bandwidth: 40Hz-8000Hz ±3dB
POSTPOSITION-AMP:
Load impedance: 50-2000ohm
Output level: +17dBv
Distortion: <0.1% (1000Hz)
Gain from line to output: +31dB
BANDWIDTH:
200Hz-800Hz ±3dB
SIDETONE:
Adjustable range: >32dB
EARPHONE:
Dynamic 50-2000 ohm
MICROPHONE:
Dynamic 100-600 ohm
CONNECTOR:
Headset connector: XLR-4M or XLR-5F
Pin 1--Mic common
