- 11 -
BLASTING AREAS
To avoid interfering with blasting operations, turn your phone OFF when in a
“blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and
instructions.
POTENTIALLY EXPLOSIVE ATMOSPHERES
Turn your phone OFF when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Sparks in such areas could cause an explosion
or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include fueling areas such as gasoline stations; below deck on
boats; fuel or chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air contains
chemicals or particles, such as grain, dust, or metal powders; and any other area
where you would normally be advised to turn off your vehicle engine.
FOR VEHICLES EQUIPPED WITH AN AIR BAG
An air bag inflates with great force. DO NOT place objects, including both installed
or portable wireless equipment, in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
- 12 -
2. PREPARING YOUR PHONE FOR USE
2.1 Install the back-up battery
•
Remove the modular plug of curl cord from bottom of the base.
•
Open the door of the battery compartment, which is located to bottom of the
base.
•
Insert alkaline or dry cell battery (4 x AA Size)
•
Close the door of the battery compartment.
•
Insert the modular plug of curl cord to the base.
•
The phone turns on automatically.
•
You can use the phone by the back-up battery without power supply.
CAUTION!
Do not use rechargeable battery.
2.2 Remove the back-up battery
•
Remove t
h
e modular plug of curl cord from bottom of the base.
•
Open the door of the battery compartment, which is located to bottom of the
base.
•
Close the door of the battery compartment.
•
Insert the modular plug of curl cord to the base.
2.3 Install the power supply
2.3.1 Install the car’s power supply (Option1)
①
Connect the plug of car’s power supply to the bottom of the phone.
②
Connect the cigar plug of car’s power supply to the car jack.
③
The phone turns on automatically.