Teli CGSV90CC3 Скачать руководство пользователя

Страница: 5 / 50

D4153660A

CASES FOR INDEMNITY (LIMITED WARRANTY)

We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in

the following cases.

In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party,

deliberate or accidental misuse by the user, or use under extreme operating conditions.

In the case of indirect, additional, consequential damages (loss of business interests, suspension of business

activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from

responsibility for such damages.

In the case damage or losses are caused by failure to observe the information contained in the instructions in

this instruction manual and specifications.

In the case damage or losses are caused by use contrary to the instructions in this instruction manual and

specifications.

In the case damage or losses are caused by malfunction or other problems resulting from use of equipment

(connected equipments including Gigabit Ethernet Interface board, the lens, etc.) or software that is not

specified.

In the case damage or losses are caused by repair or modification conducted by the customer or any

unauthorized third party (such as an unauthorized service representative).

Expenses we bear on this product shall be limited to the individual price of the product.

RESTRICTION FOR USE

Should the equipment be used in the following conditions or environments, give consideration to safety

measures and inform us of such usage:

1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.

2. Use of the equipment in applications expected to cause potential hazard to people or property, which

require special safety measures to be adopted.

This product can be used under diverse operating conditions. Determination of applicability of equipment or

devices concerned shall be determined after analysis or testing as necessary by the designer of such

equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the

performance and safety of the equipment or devices.

This product is not designed or manufactured to be used for control of equipment directly concerned with

human life (*1) or equipment relating to maintenance of public services/functions involving factors of

safety (*2). Therefore, the product shall not be used for such applications.

(*1): Equipment directly concerned with human life refers to.

· Medical equipment such as life-support systems, equipment for operating theaters.

· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.

· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or

Building Standard Law

· Equipment related to the above

(*2) :Equipment relating to maintenance of public services/functions involving factors of safety refers to.

· Traffic control systems for air transportation, railways, roads, or marine transportation

· Equipment for nuclear power generation

· Equipment related to the above

Содержание CGSV90CC3



















































Результаты поиска

Содержание CGSV90CC3

Отзывы:

Похожие инструкции для CGSV90CC3

Бренды по названию

Популярные бренды

Teli CGSV90CC3, Инструкция по эксплуатации

Результаты поиска

Содержание CGSV90CC3

Отзывы:

Похожие инструкции для CGSV90CC3

Бренды по названию

Популярные бренды