P/N 56048603
Button Descriptions (Accessible when cover is off)
Button
Functions
CONFIG
•
Press & release to trigger WPS Push-Button
association.
•
Press & hold for 5 seconds then release to enable
the Wi-Fi Configuration AP.
•
Press & hold for 15 seconds then release to
restore Factory Defaults.
RSSI
•
Press & release to switch between normal mode
and RSSI mode.
•
Press & hold for 5 seconds then release to send a
test message to the TCC.
Single Line Interface Cable (S.L.I.C.)
Unused
GND (2, orange)
ST C (3, black)
Ring (4, red)
Unused
DC + (7, blue)
STC (6, yellow)
Tip (5, green)
LED Indicators (Normal Display)
Indicator
Description
LED 1
Telguard Registration & Activation
LED 2
Cellular Status
LED 3
Wi-Fi Status
LED 4
Not Used (Used only in RSSI Mode)
LED Indicators (RSSI Display)
RSSI
Value
Illuminated LEDs
RF (dBm)
NO SVC
LED 4 = slow flashing Red
LED 3-1 = off
n/a
1
LED 4 = solid Amber
LED 3-1 = off
≤ -111
1½
LED 4 = solid Amber
LED 3 = slow flashing Amber
LED 2-1 = off
-110
2
LED 4-3 = solid Amber
LED 2-1 = off
-100
2½
LED 4-3 = solid Green
LED 2 = slow flashing Green
LED 2 = off
-90 (Minimum
signal strength
required)
3
LED 4-2 = solid Green
LED 1 = off
-80
3½
LED 4-2 = solid Green
LED 1 = slow flashing Green
-70
4
LED 4-1 = solid Green
-60
For more detailed installation descriptions, please refer to the
Telguard Installation and Operating Instructions available for
download at
