Need help?
Call : 01306 710120
1. Dial into door entry unit
2. Press default ‘79’ followed by serial number.
Voice assist
*call point setup*
“
ENTER CALL POINT FOLLOWED BY ‘STAR’
ENTER NUMBER NOW
This allows access to the full menu. If you do
need to alter any elements of the system
that are not obtainable via the short menu
then it is recommended that you use a PC or
a modem to configure these features.
Terminates the session and hangs the line
up.
Useful Tips
If at any stage you would like the Robot to repeat the
last statement, press ‘HASH’ key when the Robot
has stopped talking. Robot will then say: “I said
The robot voice can be changed in the full menu. Levels
here can also be adjusted.
If you are at the Panel and require to set numbers,
you can switch between listening on the phone or
the panel. To activate this feature, key in: ‘1, 2, 3’
and ‘STAR’. Use this feature at the beginning of a
session where possible. To return to phone repeat
the above key in sequence.
ENTER NEW RINGING TIME NOW
ENTER ‘0’ THEN ‘STAR’ TO END SESSION
25.06.09 firmware Vxx.xx
Page 4 of 7
Enter ‘1’ then ‘STAR’ to set telephone numbers
Enter ‘3’ then ‘STAR’ to log into full menu
.
Enter ‘0’ then ‘STAR’ to exit configuration
...access to your home by the tone of your phone...
TM
