Telexper tXPER Скачать руководство пользователя страница 52

Страница: 52 / 54

Telexper International Inc.

3F-3, No.2, Chien Pa Rd., Chung Ho City,

Taipei 235, Taiwan, R.O.C.

Tel: 886-2-6620-5898 Fax: 886-2-6620-6909

E-mail: [email protected]

http://www.telexper.com ISO 9001:2000

A member of VisionSoft

IP Security Solutions

Chapter 9 CMS-Lite

–

Monitor Mode

The Monitor let you to control the nMD (video decoder) on the system easily.

The configuration of monitors, please reference to the CMS-Lite Setup chapter.

1. Click

from the Main Menu control panel and enter Monitor Mode.

2. Depending on the monitor devices you attached to the CMS-Lite system, the monitor controlling

menu will auto-adjust the displaying screen size.

3. Click on

to enter to setting page.

4. Click and drag the monitor on the screen to re-arrange the order of the physical monitors.

5. For Monitor setup, please refer to Chapter 6: LAN Device--Monitor Setup.

6. Click

to start the Sequence mode.

Single Monitor/Dual Monitor

The E-Map can be displayed in quarter-size window under Live-View screen or displayed

separately on the second monitor for dual monitor system.

PDF created with pdfFactory trial version

www.pdffactory.com

Содержание tXPER























































Результаты поиска

Содержание tXPER

Отзывы:

Telexper tXPER, Руководство пользователя, Страница: 52 / 54

Результаты поиска

Содержание tXPER

Отзывы: