Telex X-GEN, Руководство по эксплуатации

Страница: 8 / 20

Tape Types
The X-Gen stereo model with either XL or Ferrite heads is capable of
using Type II (chrome) tape or Type I (Normal Bias) tape. The table
below describes the sequence needed to set the X-Gen to the tape type
that you are using. When the X-Gen is shut off, it will “remember” the
tape type mode that you selected.
NOTE
The X-Gen is shipped in the Normal Bias mode.
TAPE TYPE SETUP INDICATION
Type I (Normal Bias)
Press and hold Stop,
then press Rewind
Power light turns red
Type II (CrO2)
Press and hold Stop,
then press Rewind
Power light turns green
Operating the Control Module as a Copy Module
An X-Gen control module can be used as a copy module when attached
to another X-Gen control module.
To use the X-Gen Control Module as a Copy Module:
Press and hold Stop button, then press Side Select button.
The Stop light will flash between red and green.
To return the module to a Control Module the power must be shut off.
When the unit is powered up again it will be restored as a Control
Module.
6