Telex TT-16 Скачать руководство пользователя страница 5

Telex TT-16 Transmitter 

 

Page 5 

 

 

 

 

  

 

Channel/Frequency assignment: 

 

Channel Frequency 

(MHz) Channel Frequency 

(MHz) 

      

 

 

64.5 

 

     A   

 

66.1 

      

 

 

64.7 

 

     B   

 

66.3 

      

 

 

64.9 

 

     C   

 

66.5 

      

 

 

65.1 

 

     D   

 

66.7 

 

 

65.3 

 

     E   

 

66.9 

      

 

 

65.5 

 

     F 

 

   

67.1 

            7                                  65.7 

 

     G   

 

67.3 

      

 

 

65.9 

 

     H   

 

67.5 

 

Power input requirement: 12-15V AC/DC at 700mA. 

 

Warranty Service Information: 
 
Please see the separate Warranty Card supplied with this product. 
 

 

APPROVAL  INFORMATION

 
The Telex Model TT-16 is authorized under Federal Communications Commission 
and Industry Canada Rules . Licensing of the transmitter, if required, is the users  
responsibility and depends upon the users classification.  
 
CAUTION: Changes or modifications made by the user could void the user’s authority  
to operate the equipment. 
 
This device complies with part 15 of the FCC rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that may 
cause undesired operation. 

Содержание TT-16






Отзывы: