EQUIPMENT OPERATION
TR-34 RECEIVER
Operation of the TR-34 Receiver
Try to keep a clear, unobstructed path be-
tween the transmitter and receiver antennas
for a clear transmission.
Plug in a unit such as an earphone, headphone
button receiver, induction coil neckloop, or
audio-input hearing aid into the receiver jack
(The cord acts as a receiving antenna).
Rotate the VOLUME OFF/ON control slowly
in the clockwise direction while monitoring
the volume level, and select the correct re-
ceive channel.
Adjust volume for desired comfort. (Engage
treble control to enhance “Highs” if desired.)
When satisfied with the channel selection and
volume level, place the receiver in a pocket or
clip it to your belt for convenience.
Always return the VOLUME OFF/ON control
to the OFF position when the Receiver is not
in use to preserve battery life.
BATTERY REPLACEMENT
The TR-34 Receiver uses two (2) AA batter-
ies. When the batteries are low the sound will
be distorted. Replace weak batteries with two
fresh AA batteries, and position them in the
battery compartment as illustrated in Figure 9.
For additional information refer to the “Bat-
tery Information” Section.
NOTE:
If the unit is to be stored for any
length of time make sure you remove the bat-
teries from the unit.
-10-
Figure 9
Battery Installation - TR-34
