RadioCom
TM
General Description
The IC-100 allows the assignment of any two of six
input lines to any one of twelve two channel outputs.
In addition, the six input lines are available as a loop
through output. All input are protected against
transients and power crosses.
IC-100 Product Features
•
Input and output connections are compatible with
BTR-1 Wireless Intercom.
•
Non-shorting rotary switches allow reconfiguration
without channel cross-connection.
•
An active power monitor indicates the presence of
power on all input lines with minimal loading.
•
D sub to XLR breakout on rear panel.
Inputs
There are two ways to connect input lines to the
IC-100:
1. Feed the lines into the 15 pin D sub connector on
the rear panel marked I/C IN. The pin assignments
are shown in Table 1.
2. Connect a patch cable between I/C IN and
EXTERNAL LINES OUTPUT on the rear panel
and feed the lines into the six XLR connectors
marked EXTERNAL LINES INPUT.
Table 1 - Inputs
IC-100
CAT. NO. 301971000
INTERCOM SOURCE ASSIGN PANEL
PN 804203
INSTRUCTION SHEET
XLR Equivalent
D Conn Pin Number
LINE 1 PIN 2
1
LINE 1 PIN 3
9
LINE 2 PIN 2
2
LINE 2 PIN 3
10
LINE 3 PIN 2
3
LINE 3 PIN 3
11
LINE 4 PIN 2
4
LINE 4 PIN 3
12
LINE 5 PIN 2
5
LINE 5 PIN 3
13
LINE 6 PIN 2
6
LINE 6 PIN 3
14
GND
7
GND
8
GND
15
Telex Communications, Inc.
Specifications
Bridging Impedance...................44k Each Channel
Supply Current ........................20ma Each Channel
Peak Pulse Capability..................................1500W
Fuse Rating ....................................1.5A Fast Blow
Overvoltage Protection < 1.5A Indefinite Duration
Size (Approximate).................H: 7.00" (177.8mm)
W: 19.00" (482.6mm)
D: 5.00" (127mm)
Weight (Approximate)..................10 lbs. (4.54 kg)
Patents ........................................................Pending
