Telex KP-812 Скачать руководство пользователя страница 83

Страница: 83 / 106

RVON-1 User Manual

NOTE

: Press

PGM

to skip over any octet that does not need modifications.

14.

Repeat steps

and

until the entire Netmask is entered.

15.

Press

PGM

The Gateway IP Address menu item appears.

NOTE

: Once you have entered the Netmask, you may need to enter the Gateway IP Address. A

Gateway

is a node (for example, a computer) on a network that serves as an

entrance to another network.

16.

Press

PGM

The actual Gateway IP Address appears.

17.

Enter the

first number

in the Gateway IP Address.

This activates the first octet of the Gateway IP Address and clears the rest of the address.

18.

Press

PGM

This confirms the first octet in the Gateway IP Address and moves you to the second octet.

NOTE

: Press

PGM

to skip over any octet that does not need modifications.

19.

Repeat steps

and

until the entire Gateway is entered.

20.

Press

PGM

21.

Press

CLR

to exit the menu.

The changes are now enabled.

NOTE

: You can still set the IP Address without being connected to an Ethernet LAN. Once

you have entered the IP information, you will be prompted to perform a

Save Cfg

. The ad-

dress is saved in the keypanel until the RVON-1 is connected to an Ethernet LAN.

TOP LEVEL MENU, RVON CONN.

Select an RVON Connection from the Top Level Menu

The RVON Conn menu contains a list of connection offers from intercoms. This menu allows the
keypanel to dynamically select an intercom and port to which it will connect.

To select a connection offer, do the following:
1.

On the KP-32, press

Menu

The top level menu appears in the CWW window.

Using the

↓↓

, scroll to

RVON Conn

Press

PGM

The currently selected intercom port appears in the CWW window. If you have not previously
selected a connection, you will see “none”.

Using the

↓↓

, scroll to the connection offer that you want to accept.

Press

PGM

→

<connection offer> appears. The arrow to left of the connection offer designates which

connection offer was chosen.

Press

CLR

to exit.

The keypanel will now connect to the selected intercom port.

Содержание KP-812











































































































Результаты поиска

Содержание KP-812

Отзывы:

Похожие инструкции для KP-812

Бренды по названию

Популярные бренды

Telex KP-812, Руководство пользователя

Результаты поиска

Содержание KP-812

Отзывы:

Похожие инструкции для KP-812

Бренды по названию

Популярные бренды