Telex KP-812 Скачать руководство пользователя страница 46

Страница: 46 / 106

KP-812 Keypanels User Manual

Service Menu

Service Menu, Aux Inputs

Controls what input levels can be adjusted by the volume knob.

Select

Aux Inputs

, then tap the encoder knob.

Intercom displays.

Tap the encoder knob.
Turn the encoder knob and then tap to either Aux In and Intercom. Tap the encoder
knob to enable or disable that item. The arrow indicates that the input is enabled.
This allows the sources volume to be adjusted.

Hold the encoder knob for 1 second to exit.
The new Aux In assignment is now set.

Run

Service Menu, Save Cfg

to store the Aux Inputs setting.

To assign the destination of the Aux Inputs, see the Mixing entry for “Service Menu, DSP
Func”.

Service Menu, Baud Rate

Select

Baud Rate

, then tap the encoder knob.

Auto Baud displays.

Turn the encoder knob to select Auto Baud, 9600 Baud, or 76.8 Baud

Tap the encoder knob once to select the baud rate.

Hold the encoder knob for 1 second to exit.
The new baud rate is now set.

Run

Service Menu, Save Cfg

to store the Baud setting.

Service Menu, Dim

This item causes the speaker or headphone level to diminish by a specified amount whenever
a talk key is activated.

Select

Dim

, then tap the encoder knob.

Speaker displays. Turn the encoder knob to select headset.

Note

By default, -8dB displays for speaker and 0dB displays for headset. This is the default
amount of dimming.

Turn the encoder knob clockwise to increase the Dim or counterclockwise to reduce
the Dim.

Hold the encoder knob for 1 second to exit.
The new dimming level is now set.

Run

Service Menu, Save Cfg

to store the Dim setting.

Service Menu, LCD Bright

This item adjusts the alphanumeric display settings.

Select

LCD Bright

, then tap the encoder knob.

An option for mods 1 through 8 or All appears.

Turn the encoder knob clockwise to increase the brightness and counterclockwise to
reduce the brightness.

Note

The brightness scale ranges from 0 to 100, with 100 being the brightest.

Run

Service Menu, Save Cfg

to store the LCD Bright setting.

Содержание KP-812











































































































Результаты поиска

Содержание KP-812

Отзывы:

Telex KP-812, Руководство пользователя, Страница: 46 / 106

Результаты поиска

Содержание KP-812

Отзывы: