background image

Factory Service and Parts Information

When returning equipment for repair include your return address, telephone number

and proof of date of purchase, along with a description of the problem.*

The address for Audiocom equipment returns and parts information is:

Service Department

Telex Communications, Inc.

West 1st Street

Blue Earth, Minnesota 56013 U.S.A.

Telephone: (507) 526-3205

(Collect calls not accepted)

Warranty Repairs - If in warranty, no charge will be made for the repairs. Equipment

returned for warranty repair must be sent prepaid and will be returned prepaid.

Non-Warranty Repairs - Equipment that is not under warranty must be sent prepaid

to Telex. If requested, an estimate of repair costs will be issued prior to service. After

your approval and completion of the repairs, the equipment will be returned on a col-

lect basis. Collect charges may be avoided by sending a signed check for payment in

full along with your signed estimate approval form (shipping charges are included in

the estimate).

* For sales / technical support and system design contact:

Pro Audio Sales Department

Telex Communications, Inc.

9600 Aldrich Avenue South

Minneapolis, Minnesota 55420 U.S.A.

Telephone: (612) 884-4051

(Collect calls not accepted)

1 4

Au d i o c o m ®

Содержание Audiocom SPS2000A

















Отзывы: