Telex Pro Audio Group DN3601C, Руководство оператора и сервисное руководство

Страница: 16 / 40

15
More EQ Menu and Display.
Accessed by pressing the More EQ key from the Start-up menu.
Soft key options: Filters
A : B
In/Out
Exit
More EQ Display
In More EQ mode, the display shows the frequency response curve calculated from the Notch filter and
High Pass and Low Pass filter settings.
CURVE/FADER
When the CURVE/FADER key is pressed, the display incorporates the Graphic fader positions into
the calculated frequency response curve.
Filters
Soft key 1 is accompanied by the text Filters. Pressing this key selects Filter Adjust mode. See below.
A : B
Soft key 2 is accompanied by the text A : B. When pressed, the key toggles between adjustment of
the Filters and Notches of channel A and those of channel B.
The channel A : B status is shown in text at the top of the screen.
In/Out
Soft key 3 is accompanied by the text In/Out. When pressed, the High and Low pass filters and two
Notch filters are switched in or out of circuit. The In/Out status is highlighted on the menu. When the
filters are out of circuit, the Filters key is disabled and the display shows a flat frequency response.
Exit
Soft key 4 is accompanied by the text Exit. When pressed, the key returns the unit to the start up display
and menu.