Telex Pro Audio Group DN3601C, Руководство оператора и сервисное руководство

Страница: 22 / 40

21
Slaves 1 to 64
The Master/Slave mode of operation. Select a single slave device to address. When a slave is selected,
all controls and adjustments affect that slave only. There are no changes to the local, master DN3600
unit. The DN3600 must be returned to STAND ALONE mode in order to control itself.
The procedure may be aborted at any time by pressing the Exit key.
Press the Slaves key a second time to complete the selection.
MIDI Chan
Soft key 2 is accompanied by the text MIDI Chan. Pressing this switch enables the selection of MIDI
send and receive channels. By use of the FREQ or LEVEL rotary control, select either OMNI ON
mode (receive all channels, send on channel 1) or OMNI OFF mode and one of MIDI channels 1 to
16.
The procedure may be aborted at any time by pressing the Exit key.
To complete the selection, press the MIDI Chan key a second time.
The DN3600 recognises MIDI program change messages 1 to 66 on its assigned channel, and maps
them to recall memories 1 to 66.
Also, the DN3600 sends MIDI program change messages 1 to 66, mapped to memory recall
commands entered via the front panel.
Inv LCD
Soft key 3 is accompanied by the text Inv LCD. When pressed, this switch toggles the LCD screen
between Normal display (white or green characters and graphics on a blue screen) and Inverted display
(blue characters and graphics on a white or green screen).
Exit
Soft key 4 is accompanied by the text Exit. When this switch is pressed, the unit returns to the
start up menu.