12
Fields
Description
MTU
Maximum Transmission Unit. The normal value for most Ethernet networks is
1500 bytes. For some ISPs you may need to enter a lower value. But this is rarely
required and shall not be done unless you are sure that it’s necessary for your
ISP connection.
Primary DNS and
Secondary DNS
If your ISP gives 1 or 2 DNS addresses, enter them in the corresponding fields.
Otherwise, the DNS servers will be assigned dynamically by your ISP.
2)
Static IP
If you choose Static IP, you shall have fixed IP parameters specified by your ISP. The configuration
interface will show as below. You shall enter the values as per the following description and then click
the Save Settings button.
Fields
Description
WAN IP Address
Enter the fixed IP address in dotted-decimal notation provided by your ISP.
WAN Subnet Mask
Enter the subnet mask in dotted-decimal notation provided by your ISP.
Usually the value is 255.255.255.0.
WAN Gateway
Enter the IP address of gateway in dotted-decimal notation provided by
your ISP.
WAN MTU
Maximum Transmission Unit. The normal value for most Ethernet networks
is 1500 bytes. For some ISPs you may need to enter a lower value. But this
is rarely required and shall not be done unless you are sure that it’s
necessary for your ISP connection.
Primary DNS and
Enter 1 or 2 DNS addresses in dotted-decimal notation provided by your
TeleWins(HK).,Co.LTD
