5
Fibre broadband implementation
cable technology
Your Lounea fibre broadband connection has been installed
To use it, you need a cable modem (Docsis 3.0 or newer) that you can acquire from
Lounea or from well-equipped consumer electronics retailers. Modems sold by Lounea
have been tested in our network and are available at a competitive price. If you do not
buy your modem directly from Lounea, please note that you must provide the modem
CMAC code to our customer service for modem identification.
Tel. +358 (0)800 30300. The broadband is available through your apartment’s
antenna sockets
. If you wish to use broadband from the same antenna socket that
your television uses, you will also need a
distributor
.
Modem installation
Choose a place for the modem near the antenna
and electric socket.
Connect the antenna cable equipped with
an F connector to the modem’s Cable port and the
other end to the antenna socket’s TV port.
If your television also uses the same antenna
socket, connect the other end of the cable to the
distributor’s DATA port and disconnect the TV
or set-top box antenna cable from the antenna
socket and connect it to the distributor’s TV port.
Connect the distributor to the TV port of the
antenna socket.
Connect the power supply cable to the POWER
port and connect the power supply to the socket.
Turn on the modem.
You can now connect your computer directly
to the modem with a network cable. Some cable
modems come with a WLAN feature, meaning that
you can use your computer wirelessly,
if you wish. See instructions for WLAN
implementation on page 6.
When you establish the connection for the first
time, the settings may take a long time to load,
sometimes even up to a few hours.
The modem is ready for use when the ONLINE
light is continuously on.
1.
3.
4.
5.
