TW-EA510 version 4 ADSL2+, WLAN 802.11g, VPN, Firewall Router
Chapter 4: Configuration
62
Configuring Packet Filter:
1. Click
Packet Filter
. You will then be presented with the predefined port filter rules screen (in this case
for the low security level), shown below:
Note
:
You may click Edit the predefined rule instead of Delete it. This is an example to show to how you add a
filter on your own.
2. Click
Delete
to delete the existing HTTP rule.
3. Click
Add TCP/UDP Filter
.
4. Input the Rule Name, Time Schedule, Source/Destination IP, Type, Source/Destination Port, Inbound
and Outbound.
Example:
Application:
Cindy_HTTP
Time Schedule:
Always On
Source / Destination IP Address(es):
0.0.0.0
(I do not wish to active the address-filter, instead I
use the port-filter)
Type:
TCP (Please refer to Table1: Predefined Port Filter)
Source Port:
0-65535
(I allow all ports to connect with the application))
Redirect Port:
80-80
(This is Port defined for HTTP)
Inbound / Outbound:
Allow
Click Add TCP/UDP Filter
Click Delete
