TW-EA510 version 4 ADSL2+, WLAN 802.11g, VPN, Firewall Router
Chapter 4:Configuration
33
Disable:
If you do not want broadcast your ESSID. Any client uses “any” wireless setting cannot
discover the Access Point (AP) of your router.
Enable:
Any client that using the “any” setting can discover the Access Point (AP) in
Regulation Domain:
There are seven Regulation Domains for you to choose from, including North
America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.
Channel ID:
Select the wireless connection ID channel that you would like to use. Use the
Scan
Channel Usage
to help to select non-occupied wireless channel.
Scan Channel Usage:
Wireless channel scan takes up to 14 seconds to survey the channel ID
in the network area. The result will show all ID channel is being occupied or not occupied.
Note:
Wireless performance may degrade if select ID channel is already being occupied by other AP(s).
TX PowerLevel:
It is function that enhances the wireless transmitting signal strength. User may adjust
this power level from minimum 0 up to maximum 255.
Note:
The Power Level maybe different in each access network user premises environment and choose the most
suitable level for your network.
Connected:
Representing in
true
or
false
. That it is the connection status between the system and the
build-in wireless card.
AP MAC Address:
It is a unique hardware address of the Access Point.
AP Firmware Version:
The Access Point firmware version.
Wireless Distribution System (WDS)
It is a wireless access point mode that enables wireless link and communication with other access point.
It is easy to be installed simply define peer’s MAC address of the connected AP. WDS takes advantages
of cost saving and flexibility which no extra wireless client device is required to bridge between two
access points and extending an existing wired or wireless infrastructure network to create a larger
network. It can connect up to 1 wireless APs for extending cover range at the same time.
In addition, WDS enhances its link connection security in WEP mode, WEP key encryption must be the
same for both access points.
WDS Service:
The default setting is
Disabled.
Check
Enable
radio button to activate this function.
1. Peer WDS MAC Address:
It is the associated AP’s MAC Address. It is important that your peer’s AP
must include your MAC address in order to acknowledge and communicate with each other.
Note:
For MAC Address, Semicolon ( : ) must be included.
