TeleWell TW-EA200, Руководство пользователя

Страница: 84 / 91

Chapter 3 Installation and Configuration
47
Delete:
Check the item you want to delete. Then, click the “Delete” button.
Destination Subnet / Dest. Subnet Mask / Gateway Address:
Fill in these fields required by
this Static Routing function.
3.4.3.6.7 MISC Configuration
WAN side HTTP server:
Default at
Disabled
. Or you may check it and specify the IP address
or a group of IPs (subnet) allowed to access router.
HTTP server port:
Default at
80
FTP/TFTP server:
Router can act as a FTP server
DMZ, DMZ Host IP:
Enable this and specify the DMZ Host IP to access any incoming request
packets from WAN site.
DHCP realy/DHCP Target IP:
Enable this and specify the DHCP server IP address for DHCP
relay function.
ICMP Proxy:
Enable/Disable the IGMP proxy function.
PPP Auto Reconnection:
To enable this function to re-establish the PPP connection again after
there was a timeout causing PPP connection is terminated.
PPP Half Bridge:
Enable this, router will get an IP address from ISP and passing it to behind
PC. At this time, the router works as a BRIDGE but using PPP to login.