TeleWell TW-3G, Руководство пользователя

Страница: 8 / 46

8
2. Insert the Ethernet patch cable into LAN Port on the back panel of
the TW-3G Router, and an available Ethernet port on the network
adapter in the computer you will use to configure the unit.
3. Connect the power adapter to the receptor on the back panel of your
TW-3G Router. Then plug the other end of the power adapter into a
wall outlet or power strip.
When router’s power has been applied, LEDs will flash ON and OFF as
the TW-3G Router performs initialization and Internet connection
processes. This will take a few minutes. When complete, the
following LEDs will illuminate green: Mobile and LAN. WLAN LED will
illuminate blue when device is ready.