15
3. 4:3 Over-H
The format is the “Pan Scan” over scan mode that
shows the real 4:3 video source on 5:4 panel format
without distortion. In order to erase the black bar on
both top and bottom, cut about 4% on “Vertical” line
to fill up the screen
4. 5:4 Over-1
The format is over scan mode to make the image
fill up the screen and cut a
bout 2% on “Vertical” and
4% on “Horizontal” lines..
5. 5:4 Over-2
The format is another over scan mode to make the
image fill up the screen and cut about 3% on “Vertical”
and 6% on “Horizontal” lines..
.
Image Optimize
Select the
“ Image Optimize” for best image setting. Press “Menu” to enter “OK” mode. To select DNR
(Dynamic Noise Reduction), the DNR will reduce the noise level and improve the video quality. There are
four levels to select (1) Low (2) Medium (3) High (4) Off. Press
“
▲/+” or “▼/-“
key to select the level.
Function (Video Mode)
Press the “Menu” key on the buttons to call out the OSD
“Menu” . Press “
▲/+” or “▼/-“
to select
“Function” mode
and press
“Menu” key again to select the “Function” option.
13