Televic LINGUA IR страница 12 Скачать руководство пользователя

Страница: 12 / 96

SAFETY INSTRUCTIONS

The safety instructions contain general safety guidelines that integrators, installers, operators, end users,

and anyone else who installs or uses Televic Conference material is required to read and follow at all times.

Safety

All Televic Conference systems are state of the art devices and have been designed to meet all quality

standards. Nevertheless, the individual components of the conference system can cause danger for persons

and material assets if

the conference system is not used as intended,

the conference system is set up by personnel not familiar with the safety regulations,

the conference system is converted or altered incorrectly,

the safety instructions are not observed.

FCC & ICES Information

(U.S.A and Canadian Models only).

This Class B digital apparatus complies with Canadian norm ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

Consult the dealer or an experienced radio/TV technician for help

SAF ETY INSTR UCTIO NS

1 2

Содержание LINGUA IR

































































































Результаты поиска

Содержание LINGUA IR

Отзывы:

Похожие инструкции для LINGUA IR

Бренды по названию

Популярные бренды

Televic LINGUA IR, Руководство по установке пользователя

Результаты поиска

Содержание LINGUA IR

Отзывы:

Похожие инструкции для LINGUA IR

Бренды по названию

Популярные бренды